Akvi Color AT-S - A waterborne stain.

Akvi Color AT-S
ОПИС A waterborne stain.

 Contains light resistant pigments.

Akvi Color AT-S is designed for spraying and dipping.


Перпорачана употреба Recommended for furniture, doors and other wood and wood fibre surfaces indoors.

Палета на бои Several colours by request.
Colour Cards Shades from the Akvicolor AT colour cards.
Gloss groups Semi-matt
Emission classification The stain does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

10 - 20 m2/l depending on the colour.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Разредувач Water
Метод на примена

Application technique

Viscosity DIN4

Conventional spraying  

Delivery viscosity


Delivery viscosity

Drying times

 (80 - 100 g/m2)

20 ºC

50 ºC

70 ºC


Recoatable, after

30 min

15 min

10 min

5 min



Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Special feature Application (+23 °C)
Conventional application. Nozzle tip 1.0 - 1.4 mm is recommended to be used with pressure 1 - 3 bar. Spray angle shall be chosen according to the shape of the object.
Содржина на цврсти материи 2 - 20 % by volume, 3 - 25 % by weight, depending on the colour.
Густина 0.99 - 1.1 kg/litre depending on the colour.
Начин на чување 6 months (23 ºC)
Шифра на производот 378 serie.

Услови за примена The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over 18 ºC and the relative humidity of the air below 70 %.
Припрема Wood surfaces should be sanded with sandpaper P150 - 240. All sanding dust must be removed with f.ex.vacuum. Note! The roughness of the sandpaper also effects of shade.
Surface treatment Recommended top lacquers: Merit, Merit Topas, Luminol Clear, Akvidur ja Akvilac. Note! Different kind of topcoats might be changed the colour shades.
Mixing of components Stir the stain carefully before use. The stain is ready for use. Different application methods may result in shade variations. The shade and hue of the stain should be verified before applying large surfaces. Akvi Color AT-S can be thinned with water, if needed.
Чистење на алатот Water.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 100 g/l of stain.

во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetAKVI COLOR AT-S [GB-ENG]