|ОПИС||Water-borne acrylate primer.|
|КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ||
Suitable for furniture, doors, mouldings and other wooden surface in interior premises.
|Features||A fast drying primer with good sanding properties.
Recoatable either with water-borne or solvent-borne products.
|Палета на бои||White|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Разредувач||Water and Akvi Thinner|
|Метод на примена||
Airless spraying, air-assisted airless spraying and conventional spraying.
For airless spraying, the product is thinned approximately 0–10% to the viscosity 40–80s (DIN4). Recommended nozzle tip is 0.011"–0.015"and pressure 100–160 bar. Spray angle shall be chosen according to the shape of the object.
For air-assisted airless spraying, the product is thinned approximately 0–10% to the viscosity 40–80s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 0–10% to the viscosity 40–80 (DIN4). Recommended nozzle tip is 1.4-1.8 mm and pressure 2–3 bar.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Содржина на цврсти материи||40±2% by volume
60±2% by weight
|Шифра на производот||006 5021|
|ДЕТАЉИ ЗА ПРИМЕНА|
|Услови за примена||The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over
+18ºC, and relative humidity of the air below 70%.
|Припрема||Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sandidng dust must be removed.|
Akvi Top 30, Akvi Top 30 FD, Diccoplast 30 and Luminol 2S N.
|Mixing of components||Stir the paint carefully. Thin the paint to the viscosity required.
|Чистење на алатот||Water or Akvi Thinner.|
|EU VOC 2004/42/EC ограничена вредност||The Volatile Organic Compounds amount is 55 g/litre of paint mixture.
VOC content of the paint mixture (thinned 10% by volume) is 50 g/l.
VOC 2004/42/EC (cat A/d ) 130 g/l (2010)
|КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ|
во согласност со Регулативата (EC) No. 1272/2008
|Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.|
|Safety data sheet||AKVI PRIMER (former AKVI SURF-O, primer) [GB-ENG]|