(Претходна дата 04.11.2013)
Akvi Top FD 30
|ОПИС||One component water-borne acrylate topcoat.|
|КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ||
Fast drying topcoat for interior use.
|Перпорачана употреба||Suitable for panels, doors, mouldings and other wooden/fibre board surfaces.|
|Features||Good blocking resistance.
Low VOC content.
The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS.
|Палета на бои||AVATINT tinting system|
|Colour Cards||RAL, NCS, SSG, BS and SYMPHONY colour cards.|
Practical coverage depends on application method, painting conditions and shape and quality of the substrate.
|Метод на примена||
Application (+ 23 °C)
Airless spraying, air-assisted airless spraying and conventional spraying.
For airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.
For air–assisted airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 0–5% . Recommended nozzle tip is 1.6–2.2mm and pressure 2–3 bar.
Drying and recoating times are related to film thickness, temperature, relative humidity of the air and ventilation.
|Содржина на цврсти материи||33±2% by volume
43±2% by weight
|Густина||1.2±0,1 kg/ litre|
|Шифра на производот||454 serie|
|ДЕТАЉИ ЗА ПРИМЕНА|
|Услови за примена||Substrate must be clean and dry before painting. During application and drying air temperature, substrate and paint must be over +18ºC and relative humidity of the air must be below 70%.|
|Припрема||Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed|
Akvi Primer MDF, Diccoplast Primer and Dicco Surf Primer.
|Mixing of components||Stir the paint carefully before use. Thin with water if necessary.|
|Чистење на алатот||Water.|
|EU VOC 2004/42/EC ограничена вредност||The Volatile Organic Compounds amount is 14.3 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5% by volume) is 13.5 g/l.
VOC 2004/42/EC (cat A/d) 130g/l (2010)
|КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ|
во согласност со Регулативата (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.|