ТЕХНИЧКИ ЛИСТ
20.11.2012

Akvilac Tix 25

 
Akvilac TIX 25
ОПИС A water-borne, one component acrylate lacquer.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ

A thixotropic water-borne lacquer with very good wetting properties.

Lacquer film is very clear and on top of dark stain colours final outlook of the lacquer is similar to solvent-borne polyurethane lacquer.

A fast drying lacquer and easy to apply also in vertical position.

Перпорачана употреба Suitable for chairs, furniture, doors, mouldings and other wooden surfaces.

ТЕХНИЧКИ ПОДАТОЦИ
Палета на бои Temaspeed Akvi Tone -tinting.
Colour Cards Shades from the Akvicolor AT colour cards and several colours by request.
Gloss groups Semi-matt
Градежен материјал (емисиона класа) M1
Emission classification The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS.
Покривност

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

24–36 µm

80–120 g/m²

8–13 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Разредувач Water
Метод на примена

Airless spraying, air-assisted airless spraying and conventional spraying.

 

Application (+23 °C)

Airless spraying application viscosity can be reached with approximately 0–10 % of thinning by volume. Recommended nozzle tip is  0.011"–0.015" and pressure 100–160 bar. Spray angle shall be chosen according to the shape of the object.

 

Air assisted airless spraying application viscosity can be reached with approximately 0–10 % of thinning by volume. Recommended nozzle tip is 0.011"–0.015" and  pressure 40–120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.

 

Conventional spraying application viscosity can be reached with approximately 0–10 % thinning by volume. Recommended nozzle tip is 1.4–1.8 mm and  pressure 2–3 bar.

Drying times

100 g/m2 wet film

+23ºC

+ 50ºC

Dust dry, after

15–20 min

5 min

Touch dry, after

20–30 min

10 min

Dry to sand, after

25–35 min

10–15 min

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Содржина на цврсти материи Volume solids 30±2%
Weight solids 32±2%
Густина 1.0 kg/litre
Шифра на производот 448 6909

ДЕТАЉИ ЗА ПРИМЕНА
Услови за примена The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over +18ºC and the relative humidity of the air below 70%. Good ventilation is needed during drying process.
Припрема Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.
Mixing of components Stir the lacquer carefully before use. Avoid flotation. Thin with water to the viscosity required.
Чистење на алатот Water.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 85 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 100 g/l.
VOC 2004/42/EC (cat A/e ) 130 g/l (2010)

КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ
во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetAKVILAC TIX 25 [GB-ENG]
 
-


Назад