Dicco Color

Dicco Color
ОПИС A solvent borne stain.

Recommended for furniture, doors and other wooden and wood board surfaces indoors.

Перпорачана употреба -

Features Contains soluble, light resistant dyestuff. Can be used also to stain putty spots.
Colour Cards Dicco Color colour card and colors for request.

Recommended spreading amounts (unthinned)

Theoretical coverage




 5 µm

40–60 g/m2

14–16 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Разредувач 1027, 1033, 1034 and 1035
Метод на примена

Conventional spraying, roller coating and dip coating.


For conventional spraying the product is not thinned. Recommended nozzle tip is 1.0–1.4 mm and  pressure 1–3 bar.


For dip coating the product is not thinned.


For roller coating application the product is not thinned.


Different application methods may cause variations of the colour of the stain. The colour and intensity of the stain should be verified before applying large surfaces. Notice that different kinds of top lacquers can change the colour. Also roughness of the sanding paper will affect on staining.

Drying times

80–100 g/m2





Recoatable, after



2–3 min

15–30 s


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Содржина на цврсти материи 1-8 % by volume, depending on the colour.
1–10%, depending on the colour.
Густина 0.90 kg / litre, depending on the colour.
Шифра на производот 294 serie

Услови за примена The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over +18ºC and the relative humidity of the air below 70%.
Припрема Wood surfaces must be sanded with sanding paper P150-240. Sanding between primer and top coat can be done with sanding paper P240-400. All sanding dust must be removed before applying the stain.
Lacquering Recommended top lacquers:
Merit or Akvi laquers.
Mixing of components Stir the stain carefully before use. The stain is ready for use.
Dicco Color can be thinned with Thinner 1027, 1033, 1034 or 1035, if necessary.
Dicco Color stain can be mixed with Merit lacquers.
Чистење на алатот Thinner 1027, 1033, 1034 tai 1035.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 800 g/litre of stain.
Maximum VOC content in ready to use stain (thinned 10% by volume) is 800 g/l.

во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetDICCO COLOR [GB-ENG]
Thinner safety data sheetTHINNER 1033 [GB-ENG]