ТЕХНИЧКИ ЛИСТ
04.04.2013

Dicco Flex 30

 
Dicco Flex 30
ОПИС A two component acid catalysed topcoat.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ A fast drying and elastic paint for outdoor use. Thixotropic paint with good hiding properties.
Перпорачана употреба Recommended for wooden window frames and front doors.

ТЕХНИЧКИ ПОДАТОЦИ
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards.

TEMASPEED PREMIUM tinting.
Gloss groups Semi-matt
Покривност

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

40–50 µm

100–120 g/m2

11–13 m2/l

 

Stacking temperature below +35ºC.


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Разредувач 1027, 1033 and 1006
Mixing ratio Paint 100 parts by volume 752 serie
Hardener 10 parts by volume 006 2098
Метод на примена

Airless spraying, air-assisted airless spraying and conventional spraying.

 

Application (+23 °C)

For airless spraying, the product is thinned approximately 10–20% to the viscosity

25–50s (DIN 4). Nozzle tip 0.011"–0.015" and nozzle pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.

 

For air assisted airless spraying, the product is thinned approximately 10–20% to the viscosity 25–50s (DIN 4). Nozzle tip 0.011"–0.015" and nozzle pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, the product is thinned approximately 10–20% to the viscosity 20–25s (DIN 4). Nozzle tip 1.4–1.8 mm and the nozzle pressure 2–3 bar.

Pot-life (+23°C) 48 hours
Drying times

100–120 g/m²

+23ºC

+50ºC

Dry to touch, after

40–60 min

20–30 min

Dry to stack, after

24 h

3–4 h

Dry to pack, after

2-3 d

6-8 h

 

Stacking temperature below +35ºC.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Содржина на цврсти материи 55±2% by volume, 69±2% by weight
Густина 1.3 kg/litre
Шифра на производот 752 serie

ДЕТАЉИ ЗА ПРИМЕНА
Услови за примена The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70 %.
Припрема Wood surfaces must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed before painting.
Priming Recommended primers: Diccoplast Elastic Primer and Diccodur Primer.
Mixing of components Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098 and mix again carefully. Thin the paint to the viscosity required with Thinner 1027 or 1033.

Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
Чистење на алатот Thinner 1027 or 1033.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 390 g/litre of paint mixture.
VOC content of the paint mixture (thinned 20 % by volume) is 480 g/l.
VOC 2004/42/EC (catA/j) 500 g/l (2010).

КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ
во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetDICCO FLEX 30 [GB-ENG]
Thinner safety data sheetTHINNER 1033 [GB-ENG]
Hardener safety data sheetHARDENER 006 2098 [GB-ENG]
 
-


Назад