Diccoplast 30 Tix
|ОПИС||A two component acid catalysed topcoat.|
|КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ||
A fast drying, durable paint with good filling properties for indoor use.
Thixotropic paint with good hiding properties.
|Перпорачана употреба||Recommended for furniture, doors and other wooden and fibre board surfaces.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards.
TEMASPEED PREMIUM tinting.
|Emission classification||Emission levels of this paint fulfils the E1-classification. Paint has been tested according to EN 717-1, and formaldehyde emission is less than 0.124 mg/m3 air.|
|Разредувач||1027 and 1033|
|Mixing ratio||Paint 100 parts by volume 655 serie
Hardener 10 parts by volume 006 2098
|Метод на примена||
Airless spraying, air-assisted airless spraying and conventional spraying.
Application (+23 °C)
For airless spraying, the product is thinned approximately 10–20% to the viscosity
25–50s (DIN 4). Nozzle tip 0.011"–0.015" and nozzle pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.
For air assisted airless spraying, the product is thinned approximately 10–20% to the viscosity 25–50s (DIN 4). Nozzle tip 0.011"–0.015" and nozzle pressure 40–120 bar. Atomising air pressure should be about 1-3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 10–20% to the viscosity 20–25s (DIN 4). Nozzle tip 1.4–1.8 mm and the nozzle pressure 2–3 bar.
|Pot-life (+23°C)||48 hours.|
Stacking temperature below +35 ºC.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Содржина на цврсти материи||52±2% by volume
68±2% by weight
|Шифра на производот||655 serie|
|ДЕТАЉИ ЗА ПРИМЕНА|
|Услови за примена||The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70%.|
|Припрема||Wood surfaces must be sanded with sanding paper P150-240. Sanding between primer and top coat can be done with sanding paper P240-400. All sanding dust must be removed before painting.|
Diccoplast Primer and Diccoplast Plus Tix.
|Премачкување||Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098 and mix again carefully. Thin the paint to the viscosity required with Thinner 1027 or 1033.
Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
|Mixing of components||Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098 and mix again carefully. Thin the paint to the viscosity required with Thinner 1027 or 1033.|
|Чистење на алатот||Thinner 1027 or 1033.|
|EU VOC 2004/42/EC ограничена вредност||The Volatile Organic Compounds amount is 400 g/litre of paint mixture.
VOC content of the paint mixture (thinned 20 % by volume) is 480 g/l.
VOC 2004/42/EC (catA/j) 500 g/l (2010).
|КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ|
во согласност со Регулативата (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.|
|Safety data sheet||DICCOPLAST 30 TIX [GB-ENG]|
|Thinner safety data sheet||THINNER 1033 [GB-ENG]|
|Hardener safety data sheet||HARDENER 006 2098 [GB-ENG]|