(Претходна дата 28.08.2013)

Fontecryl AP

Tikkurila Industry 9L
ОПИС A waterborne, one component fast drying acrylic based primer containing active anticorrosive pigments.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ Recommended to be used as an anti-corrosive primer on steel, aluminium and zinc surfaces. Suitable also for dipping. Drying times can be shortened by using higher temperatures. Overcoatable with a wide range of products, also with solvent-borne products.
Перпорачана употреба Steel, aluminium and zinc surfaces.

Палета на бои Black, yellow, iron oxide red, grey, RAL 7046 and TEMASPEED FONTE tinting.
Gloss groups Matt

Recommended film thicknesses

Theoretical coverage




40 µm

125 µm

8.3 m2/l

Recommended film thicknesses with Duasolid 50 as a topcoat

Theoretical coverage




20 µm

60 µm

16.5 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Разредувач Water
Метод на примена By spray or dip.
Drying times

DFT 40 µm

+ 15 ºC

+ 23 ºC

+ 60 ºC

Dust dry, after

2 h

30 min

5 min

Touch dry, after

2 ½ h

1 h

15 min

Recoatable , min. after

24 h

1 - 2 h

30 min

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Содржина на цврсти материи 33 ± 2 % volume
Густина 1.2 kg / l
Шифра на производот 006 5970, -72, -73, -75, -78, 539-series

Услови за примена All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15 ºC during application or drying. Relative humidity should be between 20 - 70 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Припрема Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
Priming Fontecryl AP.
Finishing Duasolid 50, Temadur SC and Fontelac QD 80.
Премачкување By spray or dip. Depending on the application method the paint can be thinned 0 - 15 %. At dip application the viscosity should be 20 - 25 s DIN 4.

Note! The viscosity falls quickly when thinning the paint.
Чистење на алатот FONTECLEAN 1921.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 120 g/litre of paint.
VOC content in paint (thinned 15 % by volume) is 100 g/l.

во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetFONTECRYL AP BLACK, YELLOW, RED, TVT 4004, RAL 8017, NCS S 8000-N, RAL 7046 [GB-ENG]