ТЕХНИЧКИ ЛИСТ
15.03.2013

Fontecryl SC 50

 
Tikkurila Industry 9L
ОПИС A waterborne, one component fast drying alkyd modified acrylic paint which contains active anticorrosive pigments.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ

Suitable for product painting in metal industry and painting stations. Recommended especially as a single coat paint system for steel structures indoors and outdoors. Drying times can be shortened by using higher temperatures.

Перпорачана употреба Typical uses are e.g. steel frameworks, machinery and equipment.

ТЕХНИЧКИ ПОДАТОЦИ
Colour Cards TEMASPEED FONTE tinting.
Gloss groups Semi-gloss
Покривност

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

100 µm

10.0 m2/l

80 µm

200 µm

5.0 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Разредувач Water
Метод на примена By conventional or airless spay.
Drying times

DFT 80 µm

+ 15 ºC

+ 23 ºC

+ 60 ºC

Dust dry, after

1½ h

30 min

5 min

Touch dry, after

3h

1 ½ h

15 min

Recoatable with the product itself

No limitations


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Содржина на цврсти материи 40 ± 2 volume % (ISO 3233)
50 ± 2 weight %
Густина 1.2 ± 0.1 kg/l .
Шифра на производот 624 -series

ДЕТАЉИ ЗА ПРИМЕНА
Услови за примена All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15ºC during application or drying. Relative humidity should be between
20 - 70%. The surface temperature of the steel should remain at least 3ºC above the dew point.
Припрема Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Fontecryl 10, Fontecryl AP.
Finishing Fontecryl SC 50.
Премачкување By conventional or airless spay. The application method the paint can be thinned
0 - 10%. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Чистење на алатот Water or Fonteclean 1921. The equipment must be cleaned immediately after use before the paint dries.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 40 g/litre of paint.
VOC content in paint (thinned 10 % by volume) is 35 g/l.

КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ
во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional use only.
Safety data sheetFONTECRYL SC 50 [GB-ENG]
 
-


Назад