ТЕХНИЧКИ ЛИСТ
03.09.2013

Pinjasol

 
Tikkurila Industry 9L
ОПИС A transparent priming oil for exterior wood.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ

Solvent-borne oil-based priming oil for exterior wood. Penetrates into the wood retarding the adverse effects of moisture and thus prevents mould growth.

Перпорачана употреба Suitable for wooden surfaces such as window frames, front doors, exterior wood claddings, log cabins etc. For protection and priming of wooden boards and structures before surface treatment. Suitable for sawn and planed timber, joinery, logs, thermally treated and impregnated wood in exterior use.

ТЕХНИЧКИ ПОДАТОЦИ
Палета на бои Clear.
Покривност

 

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

                 No film

~90 g/m²

8–10 m2/l (planed wood)

No film

~170 g/m²

4–6 m2/l (sawn wood)

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Метод на примена

Airless spraying, air-assisted airless spraying and conventional spraying. 

 

For airless spraying, recommended nozzle tip is 0.009"–0.011" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.

 

For air-assisted airless spraying,  recommended nozzle tip is 0.009"–0.011"  and  pressure 40–120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, recommended nozzle tip is 1.0–1.4 mm and  pressure

1.5–3.0 bar.

Drying times

110–120 g/m2

+20ºC

Dry to handle, after

6–12 h

Dry to handle, in stack, after

24h

Topcoating, after

24h

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Содржина на цврсти материи 8±2% by volume, 10±2% by weight.
Густина 0.84 kg/l
Шифра на производот 005 0840

ДЕТАЉИ ЗА ПРИМЕНА
Услови за примена The surface to be treated has to be clean and dry. The moisture content of the wood should be below 19%. During application and drying the temperature of the air, the surface to be treated and the oil has to be over +5ºC and the relative humidity of the air below 80%.
Treatment Stir the oil well. The product is ready for use.
Surface treatment Untreated surfaces:
Clean surface from dirt, dust and loose material. Wash mouldy surfaces with Tikkurila Mould Removal or Tehopesu Super Clean according to the instructions.
Mixing of components Stir Pinjasol carefully before use. The product is ready for use.
Чистење на алатот Thinner 1050.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 762 g/litre of oil.

КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ
во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. Risk of self-ignition! Cleaning cloths, sanding dust or overspray containing the product can create fire by self-ignition. Waste like this should be collected and stored in water before disposal, or dried preferably outdoors or incinerated immediately. For industrial use only.
Safety data sheetPINJASOL [GB-ENG]
Thinner safety data sheetWHITE SPIRIT 1050 with mild odour (LAKKABENSIINI 1050) [GB-ENG]
 
-


Назад