Temal 400

Tikkurila Industry 9L
ОПИС A heat resistant silicone paint.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ Recommended for exteriors of steel structures exposed to high temperatures.
Перпорачана употреба Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces indoors and outdoors.

Features Resistant to temperatures up to + 400 ºC dry heat on steel surfaces.
Палета на бои Black.
Gloss groups Matt

Recommended film thicknesses

Theoretical coverage




15 µm

75 µm

12,7 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Разредувач 1031
Метод на примена By airless spray (airmix system is recommended) or conventional spray or by brush.
Drying times

DFT 15 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

5 min

Touch dry, after

1 h

30 min

15 min

Recoatable, after

3 h

2 h

1 h

Final cure and hardness will be obtained by curing at +230 ºC, 1 h.

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Содржина на цврсти материи 19 ± 2 % volume (ISO 3233)
34 ± 2 % weight
Густина 1.1 kg / l
Шифра на производот 006 7683

Услови за примена All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 10 ºC during application. Relative humidity should not exceed 80 %. The surface temperature of steel should remain at least 3 ºC above the dew point.
Припрема Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temasil 90.
Finishing Temal.
Премачкување By airless spray (airmix system is recommended) or conventional spray or by brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Чистење на алатот Thinner 1031.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 700 g/litre of paint.
VOC of the paint (thinned 10 % by volume) is 715 g/l.
For industrial and professional use only.

во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTEMAL 400 [GB-ENG]
Thinner safety data sheetTHINNER 1031 [GB-ENG]