ТЕХНИЧКИ ЛИСТ
22.02.2010

Temazinc EE

 
Tikkurila Industry 9L
ОПИС A one component zinc dust paint.
КАРАКТЕРИСТИКИ НА ПРОИЗВООДОТ Used as a primer for steel surfaces exposed to weathering and chemical stress. Ideal as a touch-up primer on damaged areas of zinc primed steel. Can be used without a topcoat on surfaces exposed to climatic stress.
Перпорачана употреба Steel surfaces.

ТЕХНИЧКИ ПОДАТОЦИ
Features Offers cathodic protection for steel.
Палета на бои Grey.
Gloss groups Matt
Покривност

Recommended film thicknesses

Theoretical coverage

dry

wet

 

30 µm

55 µm

18.7 m2/l

50 µm

90 µm

11.2 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Разредувач 1006
Метод на примена By dipping, spray or brush.
Drying times

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

15 min

Touch dry, after

3 h

1,5 h

1 h

Recoatable, after

12 h

6 h

3 h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Содржина на цврсти материи 56 ± 2 % volume
Густина 2.7 kg / l
Шифра на производот 008 7395

ДЕТАЉИ ЗА ПРИМЕНА
Услови за примена All surfaces must be dry. The temperature of the ambient air or surface should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Припрема Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1)
Finishing TEMANYL MS PRIMER, TEMAPRIME EE and FONTECRYL 10.
Премачкување By dipping, spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint should be thinned 0 - 10 % by volume. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.
Чистење на алатот Thinner 1006.
EU VOC 2004/42/EC ограничена вредност The Volatile Organic Compounds amount is 385 g/litre of paint.
VOC content of the paint (thinned 10 % by volume) is 417 g/l.
For industrial and professional use only.

КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ
во согласност со Регулативата (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTEMAZINC EE [GB-ENG]
Thinner safety data sheetTHINNER 1006 [GB-ENG]
 
-


Назад