Otex Akva Adhesion Primer
Брзосушив водоразредлив адхезионен прајмер.
Карактеристики на произвоодот
Suitable for priming and undercoating both new and
previously painted surfaces. Otex Akva adheres well on surfaces requiring
special adhesion like glass, tiles, glass fibre, melamine, PVC-plastic,
aluminium, zinc coated sheet metal and surfaces coated with alkyd and acid-curing
paint. Suits also for wood, wood fibre board, chipboard and metal surfaces in
dry interior premises. Not suitable for maintenance painting of surfaces
painted with nitrocellulose lacquer.
For interior surfaces that require special adhesion. Also for exterior window frames painted with polyurethane or acid-curing paints.
Палета на бои
Tikkurila Symphony 2436 color card. Color accuracy is not perfect in dark colors.
Градежен материјал (емисиона класа)
0.9 l, 2.7 l, 9 l
Метод на примена
Brush, roller or spray
- nozzle 0.013" - 0.015"
- thinning 0-5 % by volume
Време на сушење на 23°C и 50% релативна влажност на воздухот
Touch dry after approx. 1 hour.
Recoatable with Otex Akva after approx. 2 hours.
Содржина на цврсти материи
1.3 kg/l, ISO 2811
Начин на чување
Protect from frost.
Шифра на производот
Услови за примена
The surface to be painted must be dry, the temperature of the air at least +8 C, and the relative humidity of the air below 80 %. Shallow temperature (approx. +15 °C) and fairly high humidity (50-70% RH) extend the working time of the paint and facilitate the work.
Remove dirt and dust from the surface. Treat knots on bare wood surfaces with Knotting Lacquer. Wash surfaces requiring special adhesion with Maalipesu cleaning agent and rinse carefully with water. Sand the surface matt. Remove sanding dust.
Previously painted surface:
Wash the surface with Maalipesu cleaning agent and rinse carefully with water. Sand the surface matt. Remove sanding dust.
Stir Otex Akva carefully before use and thin with water, if necessary. Apply with brush, roller, paint pad or spray. On large surfaces it is best to apply the paint first with e.g. a furniture paint roller and level with a brush. We recommend to use synthetic brushes with multi-branched bristles.
The surface can be finished after 5 hours with Unica Akva, Helmi finishing paint or Feelings Furniture Paint.
Чистење на алатот
Remove excess paint from tools. Clean tools with water. Tikkurila Tool Cleaner is recommended for removal of slightly hardened paint.
Упатство за одржување
Cleaning earliest approx. 1 month after painting, if needed: The surfaces are cleaned with a neutral (pH 6-8) dish washing solution and soft brush, sponge or cleaning cloth. Clean very dirty surfaces with weakly alkaline (pH 8-10) detergent using e.g. cleaning cloth or sponge. Rinse the surface carefully.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them slightly with a soft brush or damp cleaning cloth.
EU VOC 2004/42/EC ограничена вредност
(cat A/g) 30g/l(2010)
Otex Akva contains VOC max. 30 g/l.
КЛАСИФИКАЦИЈА ЗА БЕЗБЕДНОСТ И ЗДРАВЈЕ
во согласност со Регулативата (EC) No. 1272/2008
Contains 1,2-benzisothiazol-3(2H)-one and 2,4,7,9-tetramethyldec-5-yne-4,7-diol. May produce an allergic reaction. Wear protective gloves.
A Material Safety Data Sheet is available on request.
ЗАШТИТА НА ЖИВОТНАТА СРЕДИНА И СПРАВУВАЊЕ И ТРАНСПОРТ НА ОТПАДОТ
Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
ADR not classified
ser021014 / ivk / 190914 / akk241014